Magnavox 37MD359B Manuel de service Page 39

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 206
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 38
9-5 A94F0TR
Is approximately +4V voltage supplied to Pin(3) of
IC901?
Ye s
No
Check Q901, Q902, DVD-MAIN PWR line and their
periphery circuit, and service it if defective.
See FLOW CHART No.13 <D+5.5V is not output.>
No
EV+1.2V is not output.
FLOW CHART NO.19
Is approximately +5V voltage supplied to the
emitter of Q901?
Ye s
Replace IC901.
P-ON+9V is not output. (LCD+16V is outputted normally.)
FLOW CHART NO.20
Is approximately
+13V voltage supp
lied to the
collector of Q642?
Is approximately +
10V voltage supplied to the
base of Q642?
Is approximately +5V voltage supp
lied to Pin(1) of
IC631?
No
Ye s
Ye s
Ye s
Check D670 and their periphery circuit, and service
it if defective.
No
Check Q635, D659 and their periphery circuit, and
service it if defective.
See FLOW CHART No.5 <AL+33V is not output.>
See FLOW CHAR
T No.12 <AL+13V(M+13V) is not
output.>
No
No
AL+3.3V is not output.
FLOW CHART NO.21
Is approximately +34V voltage supplied to the
collector of Q635?
Ye s
Replace IC631.
Replace Q642.
Check C632, D632 and their periphery
circuit, and service it if defective.
Check Q207, Q208, D205, P-ON-H1 line and their
periphery circuit, and ser
vice it if defective.
Replace Q211.
Is approximately -8V voltage supplied to the
base of Q211?
Ye s
No
No
LCD-6.8V is not output.
FLOW CHART NO.22
Is approximately -9V voltage supp
lied to the
Anode of D632?
Ye s
Vue de la page 38
1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 205 206

Commentaires sur ces manuels

Pas de commentaire