Magnavox 37MD359B Manuel de service télécharger pdf (Page 32)

7-1 A94F0INT

HOW TO INITIALIZE THE LCD TV/DVD

The purpose of initialization is to place the set in a new out of box condition. The customer will be prompted to

select a language and program channels after the set has been initialized.

To put the program back at the factory-default, initialize the LCD TV/DVD using the following procedure.

< DVD Section >

1. Turn the power on.

2. To enter the service mode, press the service

button on the service remote control unit.

- To cancel the service mode, press [POWER]

button on the service remote control unit.

3. To put the LCD TV/DVD into the DVD mode, press

[PREV CH] or [CH RETURN] on the remote

control unit.

4. To put the LCD TV/DVD into the Flash clear mode,

press [SOURCE] or [INPUT SELECT] buttons on

the remote control unit in this order within five

seconds.

The following screen appears.

When “OK” appears on the screen, the factory

default will be set.

5. To exit this mode, press[CHANNEL UP/DOWN]

button to go to TV mode, or press [POWER] button

to turn the power off.

Note: The name of buttons may vary with the brand

of unit.

< LCD TV Section >

1. Turn the power on.

2. To enter the service mode, press the service

button on the service remote control unit.

- To cancel the service mode, press [POWER]

button on the service remote control unit.

3. Press [INFO] button on the service remote control

unit to initialize the LCD television.

4. "INITIALIZED" will appear in the upper right of the

screen. "INITIALIZED" color will change to green

from red when initializing is completed.

Flash Memory Clear : OK

CHUCKING ON

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 205 206

Pas de commentaire

Magnavox 37MD359B Manuel de service Page 32