8-3 FL11.3TR
See FLOW CHART No.8 <P-ON+7V is not output.>
AL+13V is not output.
FLOW CHART NO.11
Ye s
No
Is approximately +13V voltage supplied to the
cathode of D641 and D642?
Check C639, D641, D642 and their per
iphery circuit,
and service it if defec
tive.
Check if there is
any leak or short-circuit on
the loaded circuit, and ser
vice it if defective.
TUNER+5V is not output. (LCD+13V is outputted normally.)
FLOW CHART NO.10
Is approximately +6.7V voltage supplied to the
collector of Q640?
Is approximately +6V voltage supplied to the
base of Q640?
No
Ye s
Ye s
Check D645 and their periphery circuit, and service
it if defective.
No
Replace Q640.
P-ON+3V is not output.
FLOW CHART NO.12
Is approximately +3V voltage supplied to the
cathode of D647?
Ye s
No
Check if there is
any leak or short-circuit on
the loaded circuit, and ser
vice it if defective.
Check C645, D647 and their periphery circuit, and
service it if defective.
P-ON+3.3V is not output.
FLOW CHART NO.13
Is approximately +5V voltage supp
lied to the
cathode of D633?
Is the "H" signal (approximately +4 V) inputted to the
base of Q637?
No
Ye s
Ye s
Check C633, D633 and their periphery circuit, and
service it if defective.
Check Q638, Q639, D666, P-ON-H2 line a
nd their
periphery circuit, and ser
vice it if defective.
No
Replace Q637.
Commentaires sur ces manuels