Magnavox MTV-51 Manuel de service télécharger pdf (Page 13)

FACTORY MENU

2-1 FA - INSTALLERS MENU

INSTALLERS MENU

Access the Installer’s Menu by using the remote control

or the keyboard on the front of the set.

With the remote: Press & Hold MENU key until the

Channel/Time display appears, then press 9, 8, 7, 6, and

ENTER.

With 6 button keyboard: Press and hold MENU until the

Channel/Time display appears. Simultaneously press the

VOLUME UP and CHANNEL DOWN keys.

Notes:

• When the factory mode is set to “1”, then

press ‘9’, ‘8’, ‘7’, and ‘6’, followed by

‘ENTER’ to access the Installer’s Menu.

• To acces the G2 re-adjustment mode, press 2 hold

the Menu key until the Channel/Time display appears,

then press ‘9’, ‘8’, ‘7’, ‘6’, and quit key.

00 Fact Menu: Use the Select key to select item #00,

which is the first item in the Installer’s Menu. The

Factory Mode item should always be left off (Zero is

off). When left in this mode, only items from 0 to 27

are visible. When the factory mode is set to 1, all menu

(Audio or Video settings) items will be available. Also

they will appear on the screen one at a time at the top

left of the screen.

When The Factory Mode is on, the Factory Menu line

appears at the middle of the screen to allow for proper

setting of the video.

When the Factory Mode is turned off, all TV functions

are returned to normal. The simbols at the top of the

channel menu icons is removed indicating that the

Factory Mode is off. There are 4 ways to turn off the

Factory Mode:

1. Change Installer’s Menu Item “

00 F Mode” to 0.

2. Run Auto Program.

3. Use the Clock Set feature to set the time.

4. Use Factory off IR code.

Notes:

• Video Preference Settings Inhibited: In the Video

Menu, the Custom Video Preference settings are

inhibited while the Factory Mode is on and will

NOT be stored in EEPROM. (This allows the factory

to temporarily change the settings and not store

them permanently.)

01 Preset Px: Used to store the customer menu adjust-

ments in the nonvolatile memory of the EAROM. Set-

tings for Contrast, Brightness, Color and Tint are

stored in this manner. 0 is Custom and 1 is Preset.

02 Preset Ax: Saves your custom audio settings

(Bass,treble,balance,audio mode,sound rite,front

surr,speaker) in nonvolatile memory (not affected by

power loss). Memory status is indicated by a 1 for

“custom settings already stored”, or 0 for “custom set-

tings have not been stored.”

03 Vert Pos: Sets On Scree Display vertical position. Use

the ADJUST keys.

04 Horz Pos: Sets On Screen Display horizontal position.

Use the ADJUST keys.

05 Band/Afc: There are 8 possible settings for this op-

tion.

06 Ac on: Allows the TV to turn ON just by applying AC

power. Pressing the ON button is not necessary. This

is desirable when the TV is plugged into a cable box

or a power outlet controlled by a wall switch. Use ad-

just to select 0 or 1, where 0 is OFF and 1 is ON.

Note: When set to 1 (ON), the TV does not respond to

ON/OFF commands from either the remote or the

control panel, and the SLEEP TIMER is also

nonfunctional.

07 Feature Level: Set to 1 to see Zenith Code, when set

to 0 Private Codes are shown.

08 Trap: Turn On 3.58 MHz internal trap in Video Proces-

sor.

09 RF Band Pass Activates the Band Pass Filter for RF

(Antenna) input

10 RF BRT Set Black Level for RF input (Antenna)

11 Aux BRT Set Black Level for Auxiliar input (Video:

Composite & Y/C)

12Yuv BRT Set Black Level for YUV input (Component

Video)

13Max Bright Set maximum internal Brightness Register

14Max Contrast Set maximum internal Contrast Register

15 Vert Size: Vertical amplitude adjustment Variable in

factory menu. Range: 0-127, Initial value: 63.

16 Horz Size: Horizontal amplitude adjustment Variable

in factory menu. Range: 0-63, Initial value: 31.

17 Vert Phase: Adjust the Vertical Phase, screen up -

down. Range 0-5. Initial value: 0

18 Horz Phase: Adjust the Horizontal Phase, screen left-

right. Range: 0-31. Initial value: 32

19 Audio Level: Adjust the composite audio level aoutput

of the video processor.

20 RF AGC: Adjust the AGC delay for maximum gain with

a reference level of 0 dBmV.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 55 56

Commentaires sur ces manuels

Pas de commentaire

Magnavox MTV-51 Manuel de service Page 13

Commentaires sur ces manuels

Produits connexes et manuels pour Télévisions à tube cathodique Magnavox MTV-51